Recent content by Scott Miller

  1. Scott Miller

    Hi! If you're powering it from the DC jack or the RJ45, it'll run on anything from about 6 volts...

    Hi! If you're powering it from the DC jack or the RJ45, it'll run on anything from about 6 volts up to 28 volts. Peak current draw is about 40 mA, so we recommend using a power supply rated for at least 50 mA. The adapters we sell are 9 volts and 500 mA. The repeaters always ship with the...
  2. Scott Miller

    Tracker4 - Status message telemetry

    Still working on telemetry, though I did get the supply voltage reading working again. The issue there was that the ADC pin assignment changed between PCB versions 1.3 and 1.4, and it was defaulting to the wrong pin. v1.3 boards may have trouble (I'm working on that) but that was a beta version...
  3. Scott Miller

    OpenTracker+ source code

    Everything up through the Tracker3 is open source, either BSD or GPL. I thought I'd put the T3 code up on either github or Bitbucket but I'm not seeing it. I can give you an archive of the most recent version, but at this point I probably won't put it up on github until I've had a chance to...
  4. Scott Miller

    OpenTracker+ source code

    This should be the latest version. I'm afraid the revision history as such was lost when Freepository went away. If there's something specific you need, let me know. We should have archived backups.
  5. Scott Miller

    Tracker4 - Wifi drops and very short range... Resolved

    Hi all, Pardon the duplication, but I'm going to try to hit every open thread. Please consider this forum to be strictly peer-to-peer discussion for now. For anything that needs an official response, please contact support@argentdata.com. We're tracking all tickets through Zendesk there. I...
  6. Scott Miller

    APRS SmartBeacon on build 161

    Hi all, Pardon the duplication, but I'm going to try to hit every open thread. Please consider this forum to be strictly peer-to-peer discussion for now. For anything that needs an official response, please contact support@argentdata.com. We're tracking all tickets through Zendesk there. I...
  7. Scott Miller

    APRS SmartBeacon on build 161

    Hi Jon, Can you email support@argentdata.com if you haven't done so already? I'll get a ticket going to check out the Smart Beaconing problem.
  8. Scott Miller

    Problems with Tracker4

    Hi all, Pardon the duplication, but I'm going to try to hit every open thread. Please consider this forum to be strictly peer-to-peer discussion for now. For anything that needs an official response, please contact support@argentdata.com. We're tracking all tickets through Zendesk there. I...
  9. Scott Miller

    Tracker4 audio voltage on pin 1?

    Hi all, Pardon the duplication, but I'm going to try to hit every open thread. Please consider this forum to be strictly peer-to-peer discussion for now. For anything that needs an official response, please contact support@argentdata.com. We're tracking all tickets through Zendesk there. I...
  10. Scott Miller

    Tracker4 audio voltage on pin 1?

    I've made some fixes to the reconnection code. Make sure you update and give it another try.
  11. Scott Miller

    Tracker4 - Status message telemetry

    Not really feasible, I'm afraid. I checked it out and it's too heavy a protocol to fit in the T4 without taking up way too much code space. Telnet with TLS might be possible, but unfortunately the WiFi module doesn't support STARTTLS and telnet over TLS doesn't seem to be widely supported. Also...
  12. Scott Miller

    Tracker4 - Status message telemetry

    Hi all, Pardon the duplication, but I'm going to try to hit every open thread. Please consider this forum to be strictly peer-to-peer discussion for now. For anything that needs an official response, please contact support@argentdata.com. We're tracking all tickets through Zendesk there. I...
  13. Scott Miller

    Another Tracker4 not working as expected

    Hi all, Pardon the duplication, but I'm going to try to hit every open thread. Please consider this forum to be strictly peer-to-peer discussion for now. For anything that needs an official response, please contact support@argentdata.com. We're tracking all tickets through Zendesk there. I...
  14. Scott Miller

    Got radio cable, Tracker 4 beacons, but...

    Hi all, Pardon the duplication, but I'm going to try to hit every open thread. Please consider this forum to be strictly peer-to-peer discussion for now. For anything that needs an official response, please contact support@argentdata.com. We're tracking all tickets through Zendesk there. I...
  15. Scott Miller

    Internal Logging

    Hi Lee, The internal flash is currently used only for storing voice samples. Internal logging was considered as a feature but that'll probably only happen in a future version that has support for USB.